Join Jeff and Greg as they discuss snow wheeling and how best be prepared for your winter wheeling trips on this episode of the High Sierra 4×4 Podcast!
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Tag: air
Episode 220 – On Board Air, Is it Worth It?
Join Jeff, Greg and Forrest as they talk about on board air on this episode of the High Sierra 4×4 Podcast!
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Episode 174 – Winter Wheeling Wander
Join Jeff, Greg and Forrest as they discuss what you need to do to be prepared for winter wheeling fun in the back country on this episode of the High Sierra 4×4 Podcast!!
HIGHSIERRA4X4 – 10% off and free shipping on orders over $70 to the lower 48.
Main Topic: Winter Wheeling Prep
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Episode 121 – On Board Air vs Compressor
Episode 121 – On Board Air vs Compressor
What’s up everyone, welcome to the High Sierra 4×4 Podcast!! This is the best off road podcast on the internet!! I’m your host Greg Bakken and hanging out with me today is the awe inspiring fullsize guy Jeff Bakken and the mini me Forrest we are here to share our passion for off roading with you!!
Episode 121!!
This podcast episode is brought to you by Northridge4x4.com the best online store in the industry for your 4×4 parts
HIGHSIERRA4X4 – 10% off and free shipping on orders over $70 to the lower 48.
What’s up Jeff?
What’s up Forrest?
What’s up Greg?
Announcements:
Main Topic: On Board Air
We all need air!!
But when choosing an air system for you rig, what should you choose and why?
What are some of the uses for air systems?
What do you plan to do with your air system?
There are many types.
Portable, Tanks, “On board”, Compressors
What does it take to run air tools?
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Thread of the Week
Front end is squeaking!!!
Events and Happenings:
Moonlight Madness poker run
Weekend of june 24, 25 and 26 2016
Outro:
HIGHSIERRA4X4 – 10% off and free shipping on orders over $70 to the lower 48
podcast@highsierra4x4.com
www.highsierra4x4com/podcast
www.facebook.com/highsierra4x4
www.highsierra4x4.com
Episode 066D – More SEMA Show Floor Interviews!!
HSP 066D – More SEMA Show Floor Interviews!!
Welcome to the High Sierra 4×4 Podcast!! I’m your host Greg Bakken and joining me is my co host Jeff Bakken. We have been wheeling for a combined 30 years and we are here to share our passion for off roading with you!!
Episode 66D!!
This episode is brought to you by metal cloak!! It’s your jeep only better!!
What’s up Jeff?
Announcements:
October Giveaway:
RareParts Ball Joints!!
Main Topic: SEMA Show 2015 Coverage!!
Maxxis
King
Dynatrac
Wild Boar
2wayair
Monster Hook
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Events and Happenings:
SEMA 2015 Las Vegas Nevada
Booth: 33296 Off Road Floor
12-2pm Everyday!!
Cal4wheel Winter Fun Festival
January 15-17, 2016
Outro:
podcast@highsierra4x4.com
www.highsierra4x4com/podcast
www.facebook.com/highsierra4x4
www.highsierra4x4.com
Episode 60 – 4 Wheeling Adventures!!
Episode 60 – 4 Wheeling Adventures!!
Welcome to the High Sierra 4×4 Podcast!! I’m your host Greg Bakken and joining me is my co host Jeff Bakken. We have been wheeling for a combined 30 years and we are here to share our passion for off roading with you!! Whether you’re looking for a Sunday drive or some hard core rock crawling!! We will cover it all!
Episode 60!!
This episode is brought to you by metal cloak!! It’s your jeep only better!!
What’s up Jeff?
Announcements:
October Giveaway:
RareParts Ball Joints!!
The world leader in airguns is an American-based company headquartered in western New York: Crosman Corporation. If you haven’t looked at airguns lately, what they’re doing will blow your minds!
The pistols are the Crosman GI Model 1911BB, a CO2 operated BB pistol with realistic blowback. It has a 20-shot magazine and can shoot BBs up to 450 feet per second.
For the JKSKINZ mounts we went with their MTR77NP. If you had a break action airgun as a kid, this gun is right up your alley. It’s styled after an M14 complete with foregrip. When you break it open and pull the muzzle down, there’s an opening in the top of the foregrip for inserting the pellet into the breech. Close it up and go shooting. And this gun has Crosman’s Nitro Piston powerplant which is a gas piston that replaces the coiled steel spring, making it quieter and more accurate.
In the door mounts are Benjamin Armada precharged pneumatic rifles. The rail may look familiar – Crosman partnered with Magpul to incorporate the M-LOK accessory rail on this gun plus it will accept any AR furniture. Benjamin is Crosman’s high end brand and this is a $1,000 .22 caliber rifle that is fully suppressed from the factory, has a 10-shot magazine and is pressurized to 3,000 PSI for shooting. It will get over 30 shots from a fill. This is the Magpul Edition and includes MOE grip and stock plus a 4-16×56 mm scope and bipod.
For the Rackbone mount we opted for the Benjamin Bulldog. This is a .357 caliber that shoots a 145 grain bullet designed by Nosler for hunting deer and hogs!
All these are available now and you can learn more at Crosman Dot Com.
http://www.crosman.com/
Main Topic: Trail runs!!
Trail Maintenance
Toyota meet and greet
Greg’s Date
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Thread of the Week:
Suggested Thread of the Week!
Rare Parts Giveaway!!
Events and Happenings:
SEMA 2015 Las Vegas Nevada
http://www.cal4wheel.com/winter-fun-festival
Outro:
podcast@highsierra4x4.com
www.highsierra4x4com/podcast
www.facebook.com/highsierra4x4
www.highsierra4x4.com
Episode 44 – Tube Benders feat. Joe from Rogue Fab
Episode 44 – Tube Benders feat. Joe from Rogue Fab
Intro: Welcome to the High Sierra 4×4 Podcast!! I’m your host Greg Bakken and joining me is my co host Jeff Bakken. We have been wheeling for 15 years and we are here to share our passion for off roading with you!! Whether you’re looking for a Sunday drive or some hard core rock crawling!! We will cover it all!
Episode 44!!
Tabandslot.com offers self serve, on demand laser cutting services (with No Setup Fees) to artists, fabricators, and small business. Make your dreams a reality over at tabandslot.com
What’s up Jeff?
Announcements:
August giveaway:
Tabandslot.com offers self serve, on demand laser cutting services (with No Setup Fees) to artists, fabricators, and small business. Make your dreams a reality over at tabandslot.com
Dave from Tab and Slot Episode 40
To celebrate Fabrication month High Sierra 4×4 is teaming up with Tab and Slot.com to give one lucky winner a fabrication project or their very own!
Main Topic: Tube Benders with Rogue
https://www.roguefab.com/index.php
Joe, Tell us about yourself.
Tell us about Rogue Fab.
Let’s talk Benders
Horizontal and vertical
https://www.roguefab.com/
Rogue Fabrication sells tube benders, Tubing Notchers, Die Sets and fabrication tools
Why should you buy a Tubing Bender from Rogue Fab? Price and performance. If you have shopped around you have seen what other manufacturers charge for die sets. Or you have seen the benders that don’t bend strong tubing and only bend to 90 degrees. Why spend over $1000 on a bender or make huge compromises in functionality when you could have bought a RogueFab bender and had all the features you need for less money?
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Hey just got done listening to your newest podcast episode and you had mentioned about potentially upgrading to 60’s! I thought maybe you should do a monthly giveaway with your 44’s? Id love a chance to get some rubi axles under my Cherokee! Just a thought haha great job guys with the show, best podcast out there! Great technical info and yall know what yall are talking about!
Thread of the Week:
Suggested Thread of the Week!
Tab and Slot Giveaway!!
Events and Happenings:
Cantina for the Con
September 5th-6th at the Spillway
Outro:
podcast@highsierra4x4.com
www.highsierra4x4com/podcast
www.facebook.com/highsierra4x4
www.highsierra4x4.com
Episode 43 – Air Compressors with Wood Industries
Episode 43 – Air Compressors with Wood Industries
Intro: Welcome to the High Sierra 4×4 Podcast!! I’m your host Greg Bakken and joining me is my co host Jeff Bakken. We have been wheeling for 15 years and we are here to share our passion for off roading with you!! Whether you’re looking for a Sunday drive or some hard core rock crawling!! We will cover it all!
Episode 43!!
Tabandslot.com offers self serve, on demand laser cutting services (with No Setup Fees) to artists, fabricators, and small business. Make your dreams a reality over at tabandslot.com
What’s up Jeff?
Announcements:
August giveaway:
Tabandslot.com offers self serve, on demand laser cutting services (with No Setup Fees) to artists, fabricators, and small business. Make your dreams a reality over at tabandslot.com
Dave from Tab and Slot Episode 40
To celebrate Fabrication month High Sierra 4×4 is teaming up with Tab and Slot.com to give one lucky winner a fabrication project or their very own!
https://www.roguefab.com/
Rogue Fabrication sells tube benders, Tubing Notchers, Die Sets and fabrication tools
Why should you buy a Tubing Bender from Rogue Fab? Price and performance. If you have shopped around you have seen what other manufacturers charge for die sets. Or you have seen the benders that don’t bend strong tubing and only bend to 90 degrees. Why spend over $1000 on a bender or make huge compromises in functionality when you could have bought a RogueFab bender and had all the features you need for less money?
Main Topic: Air Compressors with Wood Industries
http://www.eaglecompressor.com/
Listener Feedback:
Send us your questions and comments!!!
podcast@highsierra4x4.com
Thread of the Week:
Suggested Thread of the Week!
Fordyce trip turns into an all day affair…
http://www.metalmartrancho.com/
Located in Rancho Cordova and serving the greater Sacramento area with sales in steel sheet and tube, aluminum products and stainless steel. We also have nuts & bolts, casters and a large selection of remnant metals in all products. Shearing and cutting available. For all your metal needs, check out Metal Mart!
Events and Happenings:
Cantina for the Con
September 5th-6th at the Spillway
Outro:
podcast@highsierra4x4.com
www.highsierra4x4com/podcast
www.facebook.com/highsierra4x4
www.highsierra4x4.com